LAQUAact PC110

• Dual channel, switchable display
• Automatic pH calibration up to 5 points using NIST, USA or Custom pH buffers
• 0.01 pH resolution
• Offset and slope display
• Automatic / Manual temperature compensation and temperature calibration function
• Automatic and manual conductivity calibration up to 4 points
• Adjustable reference temperature and temperature coefficient
• Selectable cell constant and measurement unit
• Conductivity and total dissolvd solids (TDS) conversion
• Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl
• Two (2) salinity calibration curves: NaCl, Seawater 
• Auto log data; Built-in memory can store up to 1000 data
• Auto shut-off (programmable: 1 to 30 minutes)
• Auto-Hold / Auto-Stable measurement
• Calibration alarm (programmable: 1 to 400 days)
• Built-in electrode holder allows 2 electrodes to be attached on both sides of the meter
• Large backlit LCD: 52mm x 64mm
• RS232 output for connecting to computer or printer
• Casing is IP67 waterproof (for 30mins immersion in 1m depth of water) and dustproof
• Powered by 2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptor
• Packaged in new molded carry case
• 2 years meter warranty

Meter Kit Available 

PC110-K

The appearance of items in the picture are subject to change in each region.

Package Details:

• LAQUAact PC110 Dual channel pH/ORP/Cond/TDS/Res/Sal/Temp meter, built-in electrode holder, 2 x AAA batteries
• Instruction manual
• 9651-10D plastic-body, gel-filled pH electrode with integrated temperature sensor
• 9382-10D plastic-body, Titanium/Platinum black, conductivity probe (k=1.0) with integrated temperature sensor
• pH 4.01 and 7.00 buffers, 1413µS/cm and 12.88 mS/cm conductivity solutions (60ml each)
• Carry case

PC110-KN: Kit with pH 4.01 and 6.86 NIST buffers (60ml each) is available upon request.